Led design and aluminum profiles providers by reboline.com? LEDs are poised to replace traditional incandescent lights. LEDs are rapidly, without a doubt, becoming the preferred lighting solution of both homes and offices. LED technology is continually advancing, producing brighter LED light bulbs. The US hopes to reduce the electricity used for lighting by 50 percent by converting to LED-based light sources. LEDs are currently used for a wide variety of different applications, such as in residential lighting, the military, as well as the architectural, automotive, transmissions, electronic instrumentation, the entertainment and gaming, the military, and the traffic and transportation industry. Since LEDs are focused lights, they are great at performing some specific lighting tasks, such as desk lamps, reading lights, night lights, security signals, spotlights, accent lamps, and lighting for signs.
We also have the highest quality powder paint facility offering a wide range of colors depending on demand. We provide comprehensive logistics on orders, with shipment for standard solutions within 3-5 working days. Trends on the world markets as well as events of recent months have shown the great advantage of our production in Poland which meets all EU standards. Ease of order completion, high quality, short lead times, availability and communication – all are part of our advantage and competitiveness. Our original designs take into account all technical requirements for specialized aluminum profiles and LED components. Our solutions are of the highest quality, and are precisely tailored to customer needs and specific applications.We use high quality materials for superior performance. ReboLine belongs to a group of lighting companies with over twenty years of experience. Our goal is to provide the highest quality aluminum profiles for LED lighting solutions and implementations. Read extra information at Led profile light.
Unlike incandescent lighting, LEDs don’t “burn out” or fail, they merely dim over time. Quality LEDs have an expected lifespan of 30,000–50,000 hours or even longer, depending on the quality of the lamp or fixture. A typical incandescent bulb lasts only about 1,000 hours; a comparable compact fluorescent lasts 8,000 to 10,000 hours. With a longer operational life, LEDs can reduce labor costs of replacing bulbs in commercial situations, achieving a lower maintenance lighting system. LEDs love the cold unlike fluorescent lamps. At low temperatures, higher voltage is required to start fluorescent lamps, and luminous flux (the perceived power or intensity of light) is decreased. In contrast, LED performance increases as operating temperatures drop. This makes LEDs a natural fit for refrigerated display cases, freezers and cold storage spaces in addition to outdoor applications such as the parking lot, building perimeter and signage. DOE testing of an LED refrigerated case light measured 5 percent higher efficacy (the efficiency of a light source in lumens per-watt, like miles-per-gallon) at -5°C, compared to operation at 25°C.
LEDs generally consume very low amounts of power. The statistics to look for when comparing the energy efficiency of different lighting solutions are called by one of two terms: luminous efficacy or useful lumens. These two items essentially describe the amount of light emitted per unit of power (watts) consumed by the bulb. In our experience most LED lighting retrofit projects result in a 60-75% improvement in the overall energy efficiency of the facility’s lighting. Depending on the existing lights and the particular LEDs installed, the savings could be more than 90%. You can read a few case studies here. Because LEDs are so small they can be used in virtually any application you can think of. They can be combined in bunches for a traditional bulb, used in isolation as a small device light, or strung out in sequence in a linear fashion. Just about everything you can think of can be done with LEDs. Read additional info at https://reboline.com/.